VEHICLE PRIORITY SYSTEMS
The TRACK vehicle transponder provides a means to identify priority vehicles in vehicle pre-emption and bus location systems.
The TRACK system uses a conventional inductive loop as an in-ground antenna and a specialised receiver to provide an advanced vehicle detection system.
TRACK vehicle transponders are capable of identifying a class of vehicles (public transport, emergency vehicles) or unique code vehicle identification for vehicle tracking or bus location systems. Relay contact closures for priority vehicles are readily interfaced with the intersection traffic controllers. For unique vehicle identification, serial communications allows interface to on-line systems.
T100 Vehicle ID transmitters
The TRACK vehicle transmitter is a vehicle battery powered device that is fitted to the undercarriage of the vehicle. It provides a means to identify priority vehicles in road traffic applications. T100 vehicle transponders transmit a secure code to identify an equipped vehicle (public transport or emergency vehicle).
Part number :
436FT0100 - T100 Transmitter 11 - 40V dc
T100 Vehicle ID transmitters Spec Sheet
T100 Vehicle ID Receiver
The TRACK system uses a conventional road traffic loop as an in-ground antenna and a specialised receiver to provide a simple priority vehicle system.
T100 receivers provide a simple contact closure output in the presence of an equipped vehicle over the antenna loop. Non-equipped vehicles are ignored by the receiver.
Part number :
436FT0102 - T100 Receiver - 240V ac
T100 Vehicle ID Receiver Spec Sheet
T200 Vehicle ID transmitters
The TRACK vehicle transmitter is a vehicle battery powered device that is fitted to the undercarriage of the vehicle. It provides a means to identify priority vehicles in road traffic applications. T200 vehicle transponders can selectively transmit one of four different codes to signal intended direction or priority status to the traffic control system.
Part number :
436FT0200 - T200 Transmitter 11 - 40V dc
T200 Vehicle ID transmitters Spec Sheet
T200 Vehicle ID Receiver
The TRACK system uses a conventional road traffic loop as an in-ground antenna and a specialised receiver to provide a simple priority vehicle system.
T200 receivers provide one of four contact closure outputs depending on the code transmitted by an equipped vehicle over the antenna loop. Non-equipped vehicles are ignored by the receiver.
Part number :
436FT0202 - T200 Receiver - 240V ac
T200 Vehicle ID Receiver Spec Sheet
T2000 Vehicle ID tags
The TRACK vehicle transmitter is a vehicle battery powered device (12 - 24 V) that is fitted to the undercarriage of the vehicle. It provides a means to identify equipped moving vehicles in vehicle location applications. T2000 vehicle transponders transmit a secure code to uniquely identify an equipped vehicle.
Part numbers :
480FT0200 - T2000 Transmitter 11 - 40V dc
480FT0221 - T2002 (Code2) Transmitter 11 - 40V dc
T2000 Vehicle ID tags Spec Sheet
T2000 Vehicle ID tag Receiver
The TRACK system uses a conventional road traffic loop as an in-ground antenna and a specialised receiver to provide an advanced vehicle identification system.
T2000 receivers provide an RS232C serial output indicating the unique vehicle tag code.
Part number :
401FT0202 - T2000 Receiver - RS232 - 24V dc
T2000 Vehicle ID tag Receiver Spec Sheet
Screw Terminal base for Panel / DIN rail mounting
This item is suitable for DIN rail or panel mounting. It is used to connect equipment wiring to the Nortech T2000 Receiver above.
Part number :
CTR119090 - 11 pin DIN rail wiring base
Screw Terminal base for Panel / DIN rail mounting Spec Sheet