VEHICLE ACCESS ELECTRONICS
Nortech International are suppliers of high-tech components used in Car Park, Vehicle Access and Industrial vehicle detection systems.
Track Vehicle Identification tags and readers for vehicle access control are used in industrial and depot management applications. The Track Receiver uses a standard detection loop as an antenna and will function with most loops already installed for loop detectors.
The Track 100 receiver provides a simple contact closure to indicate a priority equipped vehicle while the T2000 range provides serial data that can interface to computer systems or Access controllers.
Nortech also offer proximity card readers and stand-alone Access Controllers.
T100 Vehicle ID tags
The TRACK vehicle transmitter is a vehicle battery powered device that is fitted to the undercarriage of the vehicle. It provides a means to identify equipped moving vehicles in access control applications. T100 vehicle transponders transmit a secure code to identify an equipped vehicle.
Part number :
436FT0100 - T100 Transmitter 11 - 40V dc
T100 Vehicle ID tags Spec Sheet
T100 Vehicle ID Receiver
The TRACK system uses a conventional inductive loop as an in-ground antenna and a specialised receiver to provide an advanced vehicle identification system.
T100 receivers provide a simple contact closure output in the presence of an equipped vehicle over the antenna loop. Non-equipped vehicles are ignored by the receiver.
Part number :
436FT0102 - T100 Rx - 240V ac
T100 Vehicle ID Receiver Spec Sheet
T2000 Vehicle ID tags
The TRACK vehicle transmitter is a vehicle battery powered device (12 - 24 V) that is fitted to the undercarriage of the vehicle. It provides a means to identify equipped moving vehicles in access control applications. T2000 vehicle transponders transmit a secure code to uniquely identify an equipped vehicle.
Part numbers :
480FT0200 - T2000 Transmitter 11 - 40V dc
480FT0221 - T2002 (Code2) Transmitter 11 - 40V dc
T2000 Vehicle ID tags Spec Sheet
T2000 Vehicle ID tag Receiver
The TRACK system uses a conventional inductive loop as an in-ground antenna and a specialised receiver to provide an advanced vehicle identification system.
T2000 receivers provide a serial output indicating the unique vehicle tag code in RS232C or Weigand formats.
Part numbers :
401FT0202 - T2000 Rx 34 bit weigand / RS232 - 24V dc
401FT0209 - T2000 Rx 26 bit weigand / RS232 - 24V dc
T2000 Vehicle ID tag Receiver Spec Sheet
T2002 Vehicle ID tag Receiver
The T2002 receiver is functionally equivalent to the T100 system. The advantage lies in the smaller receiver that fits easily into roller door controller housings.
T2002 receivers provide a simple contact closure in response to the code transmitted by any equipped vehicle over the antenna loop. Non-equipped vehicles are ignored by the receiver.
Part number :
401FT0222 - T2002 Rx (Code 2) - 24V dc
T2002 Vehicle ID tag Receiver Spec Sheet
Boom Gate Detector / Logic
The Nortech BD112 is a combination single channel vehicle detector and Boom gate controller logic unit. Inputs can be accepted from access readers and outputs are provided for the boom gate control and ticket issue interlock. The integral vehicle detector provides the safety/closing detection and incorporates roll-back protection.
The BD112 features include a Memory function that allows following authorised vehicles to exit without raising and lowering for each vehicle.
Part number :
301FT0400 - BD112 - 240V ac
Boom Gate Detector / Logic Spec Sheet
Proximity Readers, Cards and Tags
Nortech Proximity Readers are interchangeable with a wide variety of card readers and provide industry standard Wiegand, RS232 and RS485 formats according to part number.
The readers are available in door-frame and square wall-mounted models.
A range of Proximity Cards (ISO Credit card and ‘block" style) as well as key-ring access tags are available. Custom logo printing options.
Part numbers :
707FT0035 - PR125P Weigand Prox Reader 26 bit
707FT0050 - PQ Card ISO Random unique code R/O
707ND5050 - PQ Card ISO Custom coded R/W
707FT0040 - Keyline FOB Key Tags
Proximity Readers, Cards and Tags Spec Sheet
Card Reader Controllers
The CX100 Access Controller is a basic stand-alone access controller for use with any access control device that uses 26 or 34 bit weigand formats. Up to 10,000 sequential card users. Password protected access for simple programming using faceplate controls. Buzzer control, free exit and arming signals all provided. Reader power supply and door control relay contacts. Database backup key option
Part numbers :
480FT0401 - CX100 - 12/24V ac/dc
480FT0402 - CX100 Backup device
Card Reader Controllers Spec Sheet